View Single Post
  #4   Report Post  
Posted to alt.home.repair
miamicuse miamicuse is offline
external usenet poster
 
Posts: 664
Default Remodel can or new construction can?


"RBM" wrote in message
...

"MiamiCuse" wrote in message
...
I have about 50% of my ceiling sheet rock down.

I am about to purchase about 50 hi-hat recessed lights for various
locations of the house. The problem is I can't decide whether I should
get the remodel kind or the new construction kind. The housing will be
the same size, same trim everything else is the same.

I originally thought I would get the new construction kind for where I
have the ceiling sheetrock removed, and where I do not have the sheetrock
down, I will use the remodel kind. That figures to be about 28 new
construction and 22 remodel. All of them will be IC models.

But then I started thinking, is this a good idea, that some are remodel
and some are new construction, if I need to replace one in the future, it
would be difficult to remembe which is which, I can make a sketch and
make some notes, but perhaps it's easier to use the remodel kind for all
of them, get all the wiring in place, then hang new sheetrock then
install the lights then.

Any comments?

Thanks,

MC


Use remodel for remodel and new construction for new. Once you pull the
trim, it'll be obvious which frame is installed





True. that makes sense, I wasn't thinking, must be all the plaster dust I
have been breathing.