The Medway Handyman wrote:
I spend a lot of time fixing things to walls, curtain poles, blinds,
mirrors, pictures etc. I carry a pretty comprehensive range of fixings &
screws on the van - the fixings & screws supplied with the item invariably
go straight in the bin.

Fixing large items isn't a problem, its small stuff that causes the agro,
the cleats supplied with binds for example - this sort of thing;
http://www.screwfix.com/prods/86762/...20HOOK-_-86762

These are 75mm, but the ones supplied with the blinds are smaller. Problem
is you are drilling two holes in the wall very close to each other. In
plasterboard they are inclined to join together & in masonry they often
crumble. Fixing with one sound & tight screw leaves the cleat able to
swivel & the client perceives it as 'not done properly'.

Best solution I've come up with is yellow plugs, 5mm drill & number 6
screws. No good for plasterboard of course & I can't find smaller
plasterboard fixings.

Any ideas?

I've found this Fischer Wet'N'Fix product which seems like the answer.

Anyone used it?


Try using standard PB fixings and putting the yellow plug inside as a
sleeve take the no.6 screw. Has worked on occasions for me
Fix and tighten one side and use the other hole in the hardware as a
guide for the drill with a 3mm bit.