2 temp sensing things , one vaguely touching , the other bent away from the
heatsink.
Perhaps every roadie should be put in a flight case and dropped down some
stairs as a lesson.
Anyway both heatsinks must have bent relative to the pa pcb, bending the
leads.
How to anchor back more firmly than just white paste? The main TOP66 power
devices etc have those slide on spring steel clips but the loosened TO92
tranny and fan thermistor are a long way down from the mounting slots, for
anything like that. Any ideas ? - live heatsink btw, hence not rigidly held
to body.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/