View Single Post
  #40   Report Post  
Posted to alt.home.repair,misc.consumers.frugal-living,sci.electronics.repair
Donna Ohl, Grady Volunteer Coordinator Donna Ohl, Grady Volunteer Coordinator is offline
external usenet poster
 
Posts: 211
Default Quick basic advice on a dripping gas 40-gal hot-water heater

On Mon, 11 Feb 2008 02:26:24 -0000, Gary Heston wrote:
That's mainly a function of BTUs, so the second of the two above will
be slightly better; of course, it'll burn a bit more gas. If that's a
concern, go with the first.


I'm still looking up ways to make a smart decision.
One thing I've noticed is that the efficiency factors I've been quoted from
Home Depot stink (basically 58 to 59 percent).

I called PG&E and they pointed me to a $30 rebate but only for residential
gas water heaters of an EF of 62% or greater.
http://www.pge.com/res/rebates/gas_electric_storage/

Does anyone know where to find a 40gallon or 50gallon hot water heater with
that efficiency rating at a major chain (sears or home depot or ???).
http://www.pge.com/res/rebates/

Donna