You're close, but no cigar. I'm trying to define exterior corner trim
used on clapboard siding. It might simply be called corner boards or
something like that. I'll try to describe it physically.

Picture a two-story clapboard sided colonial. Usually, at each
exterior corner, a flat piece of trim wood is nailed to sort of "cap"
the corner, forming an "L" section to cover all the raw edges of the
clapboard. Very often this trim is painted white as a contrast to the
siding color. It's usually 3/4" board and its probably 6" to 10" wide
depending on the design. The edges of the clapboards butt against the
3/4" sides of the "corner boards". It runs from the last clapboard on
the foundation sides vertically up to the soffets. Now, in some
instances, I've seen 10" wide "corner boards" that have recessed
raised panels like a front door or column on a porch... but remember
it's L-shaped/2-sided.

Coining trim is usually done in masonry with stacked blocks that stick
out a little over the bricks. Some houses are showing wooden coining
blocks. Same area, but a different look. I want something 18 feet
long, L-shaped with each side being about 8" to 10" wide in the "L".

OK, come on back with the links!

On Thu, 7 Feb 2008 07:01:47 -0800 (PST), RicodJour
wrote:

On Feb 6, 6:54 pm, captmike wrote:
I'd like to replace my standard flat corner trim on a 2-story colonial
with slightly larger raised panel corner boards. Is there a formal
name for these, and does anyone have a link to a website that shows
what's available and how it was used?

I think you're referring to quoining.
http://www.archiclad.com.au/mouldings.html
The style started with stone corners on masonry buildings and made the
transition to wood when the classical revival thing was in full
swing. In Italy you can find trompe l'oiel examples painted on the
corners of stucco buildings.

Google quoining (and as a variant coining - some people have only
heard the word and it does sound similar) and check out the images
tab. You'll get lots of examples.

R