In message , Bart V
writes
My lathe has been doing double duty as a disk sander. A slab of
hardwood on the face plate with a slice of MDF to provided a nice and
true flat surface. I've been using contact cement, the rubbery stuff,
to glue a sheet of sanding paper on the MDF but it's a pain changing
the paper with the glue gumming up and all. I sand small pieces of
hardwood and the surface of a hook & loop setup does not suit my
needs.
I wonder if anyone has any suggestions for a more suitable type of
glue/cement that lets go more easily when changing paper.
Thanks,
Bart.
-
Have you tried Spray mount or similar, the spray used for mounting
photographs. From memory there are temporary and permanent versions but
from what I remember if has good adhesion against sheer.
--
John