Need 3 jaw chuck for logan 10"
On Jan 22, 7:15*am, Trevor Jones wrote:
wrote:
anyone have a good used 3 or 4 jaw chuck with reversable jaws? 6" w
1-1/2 x8 thread.
Thanks,
Jon in Nor Cal
* Unless you can get a very good one, from a reputable source that will
stand befind it, buy a new 3 jaw. It'll save you SO much headache!
* Bison brand are well made, and inexpensive, and new trumps 30 years of
wear and use.
* Parts are available, too.
* A used 4 jaw chuck is unlikely to have seen the kind of use as a 3
jaw, because there are a pile of guys out there that still think that
setting up a job in one, is some sort of black magic. Some of those
issues are mindset, some technique, and some are issues with lousy worn
out chucks that were a "bargain".
* There are a couple guys here that may be able to hook you up with
used, stuff, in good shape, Gunner is one, Leigh at Marmachine, is another..
* If you don't mind sight unseen, or at least long distance, Joe
Bergamo, at Plaza Machine Tools, in Bethel VT, is a good guy to deal with.
* At least you are looking for one of, if not the, most common thread
sizes for a lathe spindle nose. You should be able to find something decent.
|