Reversing direction on bandsaw motor
"DBailey" wrote:
If it helps, the wiring diagram for 220V shows
2, 6 to one lead from the cord
1 to the other lead from the cord
3,4,5 tied together to nothing.
In my case, 5 and 6 were swapped while wired for 220 V.
Can you post the 120V connections?
The above numbering confuses me,
Normally you exchange the T5 & T8 wires, but you don't seem to have
those numbers,
All you will need to do is exchange 2 wires.
Have you looked at the nameplate?
It should give you a connection diagram for both CW & CCW.
Lew
|