"Mikepier" wrote in message
...
This is going to be kind of hard to describe so bear with me. I'll
try
to post pics later.
I recently renovated my kitchen and I started to install the crown
molding on top of the cabinets.One
wall has wall cabinets and the last cabinet is a 45 degree cabinet
that ends with the wall . Past this wall is my DR and LR.
Here is the problem. the last 45 degree cabinet ends about 1" away
from the end of the wall. When I put up the crown, it sticks out
past
the wall. It looks good if standing in front of it in the DR, but
when
you look at it from the LR on the other side, all you see is this
piece of crown sticking out past the wall and it looks ugly. I
thought
about putting a return, but it would not look right on top of the
cabinet. I would basically have to cut the top molding about 3"
shorter then do a return and it would not look good. The only way it
looks good if I cut the end of the molding straight ( no 45 at the
wall). The molding does not stick out past the wall if I do this.
Obviously does not look as good as a return or a 45 , but this looks
like my only choice.
Anyone ever run into this before and how you dealt with it?



I sort of know what you mean. Pictures would really help. Not just
close-ups, but also vantage points from which you'll normally view the
situation.