On Dec 10, 9:35 pm, Oren wrote:
I have occasion to cut baseboard flex moulding. It is urethane, dense
and just kills my saw blades. The maker states on the web a general
comment about using any saw blade. I called them and a got generic
answer. "we use a spatula", but any blade will work....

I found plenty of info about material and blade selection, but nothing
specific to urethane (6" flex baseboard).

Using 60T or 80T blades.. this stuff kills my 12" miter saw blades. It
has become the last material cut

Any suggestion on a blade type, tooth count, or a better type of
blade? Mine are all ATB blades.

Odds are you saw blade(s) have come across a few nails and lost their
edge. A 12" saw runs at a higher FPM than most and sharpness is
paramount. Check your Yellow Pages for a saw sharpening shop, and if
you're lucky, you may find a technician that really knows his stuff.
He will return your blade with the proper set, both sides and top of
each tooth razor sharp. The side and top cutting action minimizes
friction and the result will be smooth and fuzz free.
Another possible problem could be an unusually abrasive finish on the
molding. The paint pigment could be heavily formulated with silica as
a cheap substitute for titanium dioxide and calcium carbonate blends.
It would take considerable exposure to the finish to cause a saw blade
problem, though. HTH

Joe