Andy Asberry wrote:
On Mon, 03 Dec 2007 17:47:45 -0600, "Pete C."
wrote:
Andy Asberry wrote:
No! Not for body piercings.
I have a pair of power steering cylinders that require a 1 1/8" ball
mount on the valve end. I've only found one...on a travel trailer sway
bar. Every camper supply I've checked has 1 1/4". I didn't note the
brand of the one I found.
Any suggestions on source?
--Andy Asberry--
------Texas-----
McMaster lists male rod ends in unmachined so you could turn and thread
for 1 1/8". I suspect you need a female rod end, so perhaps machine the
male one and machine a coupler sleeve. Another option would be to use a
larger size and make an insert sleeve to mate the 1 1/8" to the larger
size.
I'm glad you're on this Pete. What I'm looking for is just like a
trailer ball except 1.125" ball. Here is what I'm trying to hook up.
http://surpluscenter.com/item.asp?UI...-5999&catname=
--Andy Asberry--
------Texas-----
That's a tough one. McMaster has "bearing quality" chrome steel balls in
1 1/8" size, $11.80 for 5. Drilled and counter bored for high grade SHCS
screws they would probably do the job and be less difficult than trying
to turn your own ball studs.