Andy Hall wrote:
On 2007-12-01 09:21:44 +0000, Skipweasel said:

In article ,
says...
If you are dry lining, then you can make it simple for yourself by
placing noggings in the studwork at the right position to take the
boiler fixings.

And if you don't know exactly where that's going to be, blob-glue a bit
of tatty old ply or MDF to the back of the plasterboard - then you can
screw just about anywhere and the load's spread over a large area.
I've done that in several places in this house - like where I know in a
year or two there's going to be a shower but the details aren't
finalised.

Supporting 45kg?

Would be fine in shear... better than hanging a largish rad on
plasterboard fixings, and I have seen that done enough times.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/