View Single Post
  #6   Report Post  
Posted to uk.d-i-y
Peter Scott Peter Scott is offline
external usenet poster
 
Posts: 488
Default Dodgy digital TV - Mains problem?



GMM wrote:
We live in a poor TV reception area (really must get a new aerial!),
so the digital will often go a bit dodgy. I notice, however, that it
always pauses when something electrical switches (lights, the fridge,
the heating etc). I doubt that it's the digital box, as this has
happened with both of two independent ones that we've had. Now, it
could be simply what happens when the signal is pretty marginal, but I
got to wondering whether it says something about the state of the
wiring. Just wondered whether anyone had any bright ideas?


Do you have a masthead amplifier? Its a little box fixed to the mast
outside about 1 metre down from the aerial. In some places the voltage
drops momentarily when something switches on. Hits me because I live at
the end of a long overhead line. This might cause the amp to stop amping
so much for a moment and cause the glitch.

Probably a good time to upgrade. If you are in a fringe area a Televes
wideband aerial (DAT 45 or 75) is probably the best bet with a Televes
masthead and PSU. Which reminds me to get out the scaffold tower and
install mine. Still in the box after four months!

Peter Scott