Update on wire brushing
On 2007-11-17, Tom Gardner wrote:
Shush! Nobody's supposed to know that. The usual method of using wire
wheels is to press the workpiece harder into the under-powered,
under-revved, wrong trim length, wrong wire size, wrong diameter, wrong
width wire wheel. I'm convinced that less than 1% of people use a wire
wheel properly and I want to keep it that way! You're supposed to use a
brush once, destroy it and throw it away...then go buy a new one.
Tom, what would be a proper HP and RPM for a 8", 3/4" wide wire wheel?
i
|