how can you tell if they work harden????

bob in phx
"john" wrote in message
...


Stupendous Man wrote:
Does anyone know of a source for an air rivet hammer that only strikes
one blow per trigger pull? I have used some old ones and liked them
better than a standard chatter gun.

A good rivet gun will be easy to control the hits and should have a
regulator on it to set the air flow going into the gun. Most of the
riveting I did was with a 4x gun. This is a little overkill for 3/32
rivets but I could set up to a 3/16 an470 with no problem. If you don't
hit the rivets hard enough they will get work hardened before they are
completely set which happens when you are using an undersized gun.

John