On 5 Oct 2007 23:38:13 GMT, Jim Yanik wrote:

DerbyDad03 wrote in
oups.com:

On 5 Oct, 11:02, ransley wrote:
On Oct 5, 9:50 am, Jim Yanik wrote:





DerbyDad03 wrote
roups.com:

On 5 Oct, 04:12, wrote:
I have one of those cordless drills that has a 24 volt battery.
I was wondering what would happen if I unplugged the charger
from the wall, and left the battery in it. Will the charger
discharge the battery if I dont pull it out of the charger?

Also, someone gave me an 18 volt drill that has the identical
looking battery, except the battery is an 18 volt, not a 24.
That drill did work when he gave it to me, but his charger died,
and he just bought a new drill. Can I plug that 18V battery in
the 24V charger or will I damage the battery? It does fit into
the hole on the charger. I dont think 6 volts is that much
different, but it may be for the battery.

GMU

Here's a thought: Call the manufacturer and give them the model
number of the charger and batteries. I'll bet they know the
answer to both questions.

they might even have the manuals online. RTFM.

--
Jim Yanik
jyanik
at
kua.net- Hide quoted text -

- Show quoted text -

- A question like that might get you nowhere as phone reps are
directed
- to sell products, tech support or a repair facility might get you
the
- real answer.


What a bunch of crap.

Do you really think that if I call DeWalt Customer Service and ask
them which batteries their model DW9116 charger will safely handle
they're going to try to sell me something? At a minimum they are going
to transfer me to tech support or an on-line manual. At best they will
get the information themselves and give it to me.

Here, try it: 1-800-4-DEWALT

Let us know what they try to sell you.




IMO,one should check for an online service support site BEFORE phoning
them. It aint that hard these days.Heck,you're already online making these
posts.Instead,some would rather have others do their research for them.

Also,READ any manual you have at home,first.

No manual.
I bought this thing (USED) at an auction.
It's some off brand (no-name) drill. But for $20 I cant complain,
especially with 3 good 24v batteries, 2 identical drills, plus a
charger.

Then I got that 18volt drill that uses the same shaped battery (also
an off brand).

I'd think that ALL drill batteries should or should not be left in a
charger, which is why I am asking. What is the recommendations?
Can the battery voltage drain from being in an unplugged charger?
I like leaving it in the charger so I know which battery was recently
charged. Otherwise it's a guess...... (the drained ones are set near
the charger). Otherwise it comes down to putting masking tape on the
battery and labelling it by charge date.