On 26 Set, 02:51, "DaveM" wrote:
wrote in message

ups.com...







Hello to all,
it's first the time that I visit this forum;
I have a problem with signal generator them HEWLETT PACKARD HP3310B,
the resistance in series to the BNC of high output(current limitation)
has burnt and not see more the value;
someone of you has the electrical scheme ?
or, if you have the same model, you can readme the value of the
resistance?
Thanks you
-------------------------------------------
Giuseppe Romano,

Milano - ITALIA
-------------------------------------------

I have a manual for the HP 3310A/B. The output circuit looks like this:

Amp------+---/\/\/\/---------- High level output
| R7
\
/
\ R5
/
|
+-------------------- Low level output
|
\
/
\ R6
/
|
|
---
-

The values of the resistors a
R5: 1.58K 1%
R6: 51.1 ohms 1%
R7: 8.2 ohms 5%

Hth,
--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

"In theory, there isn't any difference between theory and practice. In
practice, there is." - Yogi Berra- Nascondi testo tra virgolette -

- Mostra testo tra virgolette -

Hello to all,
I have just replaced the burnt resistance (R7) its value is increased
from 8.2 ohm to 12Kohm (however it was in order to die);
a thanks to all, above all to DaveM, for the exact value of the burnt
resistance;
I have a last request,
someone of you (me seems DaveM), he said of having the handbook of HP
3310, if you have the electrical scheme in electronic format, could
pass it to me? it could return to me useful for the future, otherwise
thanks however.

Giuseppe
Milan - ITALY