On Sat, 4 Aug 2007 08:04:03 -0500, "SGM" wrote:

A novice trying to find a 10" (or less) table saw blade with a 3/16
kerf. Only need 3/16" for special job making grooves. Don't want to deal
with dado (wobble or stacked) or making 2 passes/groove. Seems like there
should be a 3/16" blade available somewhere.
Any suggestions as to where I might buy such blade would be greatly
appreciated.

Try a 1/8" blade, set the fence up so when you flip the board you cut
the 1/16" for your 3/16" cut (that is assuming you are doing a groove
length wise) if your crosscutting a groove a stop block with a 1/16
shim would work.

Mark