mm wrote:
On Mon, 23 Jul 2007 11:42:09 GMT, "dadiOH"
wrote:


5. Tighten bolt so molly expands behind wall and the collar flange
sets slightly into DW

6. Remove bolts

7. Put bolts through what you want to hang. A washer under the head
may be needed depending on how big a hole you drilled.

8. Screw bolts into molly inserts

If you ever remove your shelf all you need do is swipe a bit of
spackle or DW compound over the sunken collar of the molly. Easier

I think the concern is that there will be a bump where the spackle is
put over the molly, a big bump if the flange only "sets slightly" in
the DW.

Naw. You just take a hammer and dimple the insert a bit into the drywall.
You'd never know it was there.
--
Dave
www.davebbq.com