Traveling Irrigator drive motor
You sure about the 10 lbf-ft from the turbine? That seems like a lot
but I have no experience with irrigation systems.
Pure guess, and on the high side. I plan on measuring force to pull the hose
at the PTO/hand crank shaft. And the exact gear reduction the system has
today. Makes sense to not re-use the existing gear reduction setup. Then I
could look for a DC gear motor. This should be way more efficient.
The traveler is close to the reel today. I'll measure tomorrow when a full
length of hose is out. The place I'll set it out is also an uphill lie, so I
can get max. force. I'll just have a static torque wench number, moving
force will be lower.
Karl
|