Very nice indeed! Definitly charm to that barn wood and well worth the
effort I would say. Congrats!

`Casper


I harvested some barn wood last summer from neighbor, one long 9x9, some
4x6's and various other sizes.

I assume it's sruce, but that's just a guess. since Timberframes are
typically erected green, there was plenty of checking. There were nails to
remove. In short, lots of waste. I attemped the quarter-saw the beams as
much as possible to present the tightest grain.

It's splintery brittle stuff to work with. The handcut DT's from this stuff
are pretty sloppy. Dispite that, old-growth reclaimed wood has its charm.

The drawer bottoms are luan and drawer runners are oak. the rest is
barnwood.

I designed the DT's to be asymetric, the lower tail bisected by the drawer
runner groove, to create the balanced took.

The finish is shellac followed by waterlox.

-Steve