Faceplate mounting Problems
Neillarson wrote:
I have been using my 3" Face Plate with a round turned 1.5 inch piece
of maple for a mounting block. on the first one, I had a fine mist of
CA flying, second I clamped and let dry overnight but I stall had a
wood frisbee about 2/3 of the way through the bowl.
Make sure both surfaces to be glued are flat. You need some surface area
for a solid joint.
Second, put thick CA on one piece and accelerator on the other. This
will assure the joint is cured completely. (Hopefully)
|