Theres more to the story, but I can't remember what it is. I'm pretty sure
I killed 3 finishes at one time. ie I had two uses for the components, or I
had two components, of what eventually became a poly-urethane, then the
colour was added to the mixture for the third finish. Can't can't think or
say what, but you get the picture.

"bent" wrote in message
...
If you're really interested, the parts (separate components) of this type
of finish (or any type of finish) can be analyzed. The result of the
colouring can be obtained as a solid non-see through colour coat, or in an
opaque translucent (see through) way, and then there may be layers, and
then there are combinations. A book on finishes would have that
information if you go to the appropriate section(s), staring with say
(poly)urethane etc., which may take you to other sections. These may have
names, and if you understand you can make options.With this type of
product, you can even get a colourless can, then add the right type of a
colourant to it, with various formats of the colourant itself, and you can
experiment, mix, match, etc, combine different products. I needed a
waterproofing poly for an exterior door, bought a colourless poly can and
made the door look like the wood from inside a courtroom, with an
estimated flow of brown at the paint match machine, but keep the rest of
the clear can; only cause I had read the sections just before. All Try
your local library. Like many topics, its just a little too much info to
write down from someone unless being specific, good luck though.
"Understanding Wood Finishing" by Bob Flexner (if you spend the time you
can get to this info with this book pecifically - I own this book, but am
not up to that now) or "Hand-Applied Finishes" (iirc, or another - there's
a icon book) by Jeff Jewitt (I have not seen this), but may be better for
a beginner than Flexner's.

wrote in message
oups.com...
Hi,

We have a nice kitchen with old cabinets. The cabinets are made of
soid wood with beautiful carvings. The one thing we don't like is the
finish. It has an old muted dirty brownish 1950's feel. I was
wondering if there is a product to change the look of the finish a
little bit w/o refinishing (which is virtually impossible due to
carvings). We would be very happy with a redder finish or a "creamier"
finish. We need not make cabinets brighter although that would be
nice, too.

Many thanks in advance,

Aaron





----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption
=----




----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----