View Single Post
  #3   Report Post  
Posted to sci.electronics.repair
Outback OZ Outback OZ is offline
external usenet poster
 
Posts: 4
Default Cable connection help needed

On May 25, 10:50 am, "Homer J Simpson" wrote:
"Outback OZ" wrote in message

ups.com...

I have the manuals and pin out lists for both the camera and the card


Post them on a.b.s.e and post a link here.


Here are the pin outs and what is a.b.s.e. please?

Connections/pin outs/ins for the Data Translation FG board

The video input connector, J1, on the DT3157 is a SCSI-II 68-pin,
subminiature 'D' shell connector that accepts the digital input
signals
using cables from Data Translation or cables that you design. Figure 7
illustrates the J1 connector pin orientation.

1 Ground
2 AD0 (+) (MSB)
3 AD1 (+)
4 AD2 (+)
5 AD3 (+)
6 AD4 (+)
7 AD5 (+)
8 AD6 (+)
9 AD7 (+)
10 AD8 (+) or BD0 (+)
11 AD9 (+) or BD1 (+)
12 Ground
13 AD10 (+) or BD2 (+)
14 AD11 (+) or BD3 (+)
15 AD12 (+) or BD4 (+)
16 AD13 (+) or BD5 (+)
17 DIG_IO0
18 DIG_IO2
19 AD14 (+) or BD6 (+)
20 AD15 (+) or BD7 (+)
(LSB)
21 External Trigger In
22 Reserved
23 Reset Out (+)
24 Frame Enable Out (+)
25 Frame Enable In (+)
26 Line Enable In (+)
27 Line Enable Out (+)
28 Pixel Clock Out (+)
29 Pixel Clock In (+)
30 Expose (+) or SHUT(+)
31 DIG_IO4
32 DIG_IO5
33 DIG_IO6
34 Ground
35 Ground
36 AD0 ( ) (MSB)
37 AD1 ( )
38 AD2 ( )
39 AD3 ( )
40 AD4 ( )
41 AD5 ( )
42 AD6 ( )
43 AD7 ( )
44 AD8 ( ) or BD0
45 AD9 ( ) or BD1
46 Ground
47 AD10 ( ) or BD2
48 AD11 ( ) or BD3
49 AD12 ( ) or BD4
50 AD13 ( ) or BD5
51 DIG_IO1
52 DIG_IO3
53 AD14 ( ) or BD6
54 AD15 ( ) or BD7
(LSB)
55 Ground
56 Reserved
57 Reset Out ( )
58 Frame Enable Out ( )
59 Frame Enable In ( )
60 Line Enable In ( )
61 Line Enable Out ( )
62 Pixel Clock Out ( )
63 Pixel Clock In ( )
64 Expose ( ) or SHUT( )
65 Ground
66 Ground
67 DIG_IO7
68 Ground
If needed more data can be got at - http://www.datx.com/support/img-mv.htm
Model number is DT3157 for search.

Connections/pin outs/ins for the Amtel camellia 2.5meg Camera
3.1 ''DATA AND SYNC'' CONNECTOR
50 points 3M connector.
¨ connector reference :HIROSE DX10A-50S.
¨ mating connector on cable side : HIROSE DX40-50P ; shell : HIROSE
DX50-CV1.

Pin n° Signal
1 PCK+
2 PCK-
3 FEN+
4 FEN-
5 COLOUR_O2+ (1)
6 COLOUR_O2-(1)
7 PDATA0+
8 PDATA0-
9 PDATA2+
10 PDATA2-
11 PDATA4+
12 PDATA4-
13 PDATA6+
14 PDATA6-
15 PDATA8+
16 PDATA8-
17 PDATA10+
18 PDATA10-
19 GROUND
20 GROUND
21 SHUTTER+
22 SHUTTER-
23 COLOUR_I1+(1)
24 COLOUR_I1-(1)
25 NC
26 LEN+
27 LEN-
28 COLOUR_O1+ (
29 COLOUR_O1-(1)
30 GROUND
31 GROUND
32 PDATA1+
33 PDATA1-
34 PDATA3+
35 PDATA3-
36 PDATA5+
37 PDATA5-
38 PDATA7+
39 PDATA7-
40 PDATA9+
41 PDATA9-
42 PDATA11+
43 PDATA11-
44 NC
45 NC
46 TRIG_ITC+
47 TRIG_ITC-
48 COLOUR_I2+(1)
49 COLOUR_I2-(1)
50 NC
If needed more data can be got at - http://www.atmel.com/dyn/resources/p...camelia25m.pdf

Cheers
Tony