Stanton STR8-100 running fast.
Odrec wrote:
I recently acquired two Stanton STR8*100 turntables but one of them
has begun to have problems. When I press Start it goes to flyaway
speed instantly regardless of where the speed selection button is
(33/45/78). I can reach the correct speed by slowing it down with my
fingers but if I use the Pitch Slider, Pitch Bend, Pitch Select or any
speed change it just goes back to flyaway speed. If I use the reverse
button I get any of two reactions, it either stops totally or goes to
flyaway speed.
Another thing, when I press the Stop button it does not stop
immendiately like it should but acts as motor kill.
Thanks for any help you might give me...
Odrec
Often runaway speed means the loss of a FG tach pulse, such as from a
magnetic or optical speed sensing device. Sometimes even a dirty control or
switch can cause this.
In this case however, I'm thinking bad solder connections or maybe a bad
drive IC. Seems to me that if the FG were missing the braking would still
work.
Mark Z.
|