Makita 6270 DWPE3 Drill & Free Impact Driver 12V
In message , The Medway Handyman
writes
somebody wrote:
Yes, bought exactly that set (from Screwfix). Haven't really used the
drill but the impact driver is a wonderful piece of kit. For your
decking screws you'll wonder how you ever managed without one. For a
4" inch screw into 4 x 2 it doesn't even slow down.
That's what I was hoping for! How do the batteries last? I notice they are
only 1.3 a/hr. Granted with 3 it shouldn't be a problem.
I haven't done any jobs with lots of use so can't really say, but yes
with three batteries and an approx 45minute charge I haven't been too
worried about it.
Be prepared though, you can use up the screw bits quicker than with a
normal driver. They tend to break rather than wear out. Go and buy a
tub of 25 pz2 and pz3 bits while you're out shopping ;-) Oh - and
make sure they're the longer bits (50mm I think) rather than the more
common 25mm bits which don't fit the impact driver.
I tend to use those 50mm bits anyway. Shorter ones don't fit inside curtain
rail brackets & a host of other things.
Wickes do packs of 15 for about £4? They also do 3 x titanium for £3 maybe
they would be best.
I've been getting Makita, 25x50mm Pz3 for £8, they seem to be somewhere
in the middle range.
Hth
--
Someone
|