On Wed, 25 Apr 2007 19:19:34 -0700, "Phread" Gave
us:


"SuperM" SuperM@ssiveBlackHoleAtTheCenterOfTheMilkyWayGala xy.org wrote in message
.. .
On Wed, 25 Apr 2007 06:06:28 GMT, "Homer J Simpson"
Gave us:


"Randel Chiffiald" wrote in message
...

I need to replace a 2.2 mfd 160 V cap, but I don't know which type
of capacitor,(electrolytic, tant, mica, poly... etc.)

Very likely electrolytic. Could be poly. Sure isn't tantalum or mica.


All three can actually reach that value, but *we* know for sure that
it is an EL.

The problem at this point is his attitude, and the fact that he
couldn't ID it from a glance tells us he shouldn't be doing the repair
*attempt*.

If you'd read his original post, you'd know he hasn't opened the set
up yet because it's in its owner's home, so he hasn't had a chance
to have that glance, you self-rightous pig. He wrote:

"I need to replace a 2.2 mfd 160 V cap, but I don't know which type
of capacitor,(electrolytic, tant, mica, poly... etc.) it is, and I haven't
opened the set yet..." snip

I think his attitude was entirely appropriate, considering the ration
of **** he was handed by this worthless group of oinkers for the high
crime of asking for a little help.

Bull****. He has since claimed to have worked in electronics for
forty years. Anyone working in the field for that long that cannot
recognize an EL cap NEEDS to get the schematic, which was what was
suggested when HE went off on John, you stupid twit!

After following this thread for the last
couple of days,

Obviously not very well.

this entire group can FOAD as far as I'm concerned.

As if any of us give a **** with what concerns you.

Like the OP, I won't be back anytime soon.

Good, dip****.

If you can't figure out
why, you'll have to buy the manual. No one here will be willing or able
to help you.

That isn't what was said, dumbass.