In article ,
Mike Hibbert writes:
Hello

We have just had our walls skimmed and they are ready for painting -
but, I have a question!

The plasterer says, to just waterdown some cheam emulsion, paint that on
and then use a normal vinyl matt as a top coat.

The dulux decorating centre say, don't do that as it will crack, use
"super Matt" or "contract matt" and live with the fact that it will need
to be redone in 6 months or so and that it will scuff.

The Artexer says, to use a acrylic based undercoat and to then use an
ordinary emulsion as a top coat.

Ummm, who's right?

If _cheam_ emulsion is _cheap_ emulsion, then the plaster is right.
Wait for plaster to dry first, and then a few more days just to
be sure. Use matt emulsion. It will say on the tin how much to
water down, but 10%-25% is typical, with more watering down
required the more polished the plaster finish is. Matt emulsion
leaves a very nice surface for applying just about any type of
paint on top.

The dulux decorating centre is correct for a new build which
will need time to dry out, and shouldn't be painted with an
impermeable paint such as silk/vinyl until the walls are dried
through. This shouldn't be necessary just for a reskim.

Don't use PVA. This advice seems to have come from makeover TV
programs, but it's so wrong, some paint manufacturers have
had to start warning against it on their tins now. (It creates
a disaster which is very difficult to recover from.)

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]