thermal Fuse for breadmaker
In article .com,
"badgerboy" wrote:
The numbers written on it are 115C, 250V, 1A. Its about the size of a
small resistor used for PCB's.
I ordered a thermal fuse from Goodman's.net, but I'm wondering if
anyone has ever replaced one of these, and if there is any chance this
component may be other than a thermal fuse.
Guy-
I replaced one in a water distiller, and a couple in Hewlett Packard
crystal ovens.
I think there were two temperatures available from Radio Shack, and
three or more from NTE (NTE calls it a Thermal Cutoff). These were
about the size of a 1 Watt resistor, or a little smaller. One ordered
from HP was about the size of a 1/4 Watt resistor or a little larger.
As you might guess, it is not recommended to solder such a device into
the circuit. When I found that necessary, I heat-sinked each lead with
a pair of pliers close to the body. Normally you would crimp such a
temperature-sensitive device, and one of the replacements was provided
with crimp-sleeves.
Fred
|