On Feb 17, 5:18 pm, Chris wrote:
Hello,

I'm painting my bathroom (1 sink, 1 toilette). I removed the tank from the
toilette so that I can properly paint behind the toilette. Before I removed
the tank, I Googled and read that I should pick up a Toilette Repair Kit.
So, before I removed the tank, I picked up the kit.

According to the article that I read, it said that I should replace the
hardware (two screws, rubber washers and the sponge washer).

Is it necessary that I replace the sponge washer? The existing washer
appears to be much bigger than the one in the repair kit. It appears to be
in good shape.

Thanks,

--
Chris

You must have picked the wrong size kit. Makes sense to try a
reinstallation of the old one and if you're lucky you'll be all done.
If it diesn't seal well, don't compensate by overtightening the hold
down bolts - too much of a chance to crack the porcelain. Take it back
apart and take the old gasket to the store to compare to available
parts. If the box store doesn't have the correct size, try Ace
Hardware or a plumbing supply house. Good luck.

Joe