Thread
:
Hitachi 50UX26B
View Single Post
#
3
Posted to sci.electronics.repair
Jim Land
external usenet poster
Posts: 198
Hitachi 50UX26B
wrote in news:1170263567.785834.242620
@m58g2000cwm.googlegroups.com:
Hi there I just recieved a Hitachi Ultravision 50UX26B and after about
5 minutes it will shutdown and the red protection led will be on
inside, turning it back on keeps it on for about 30 sec more each
time. The 5 green leds inside are one strong while powered up and the
protection (red led) is softly on until the set powers down then its
bright and the green ones go out.
I can'nt see any blown caps or components and all fuses are good (even
the "litlfuse") but while powered on there is a buzz from around the
"protection" area on the circuit board (picture).
Picture looks GREAT when its on and audio is good to, so if its not to
bad of a fix (probably can do myself) I would really like to get it
working again so I dont have to go back to the 20" daewoo
Thanks for ANY help.
Start with the FAQ, which has great information:
http://www.repairfaq.org/sam/smpsfaq.htm
Reply With Quote
Jim Land
View Public Profile
Find all posts by Jim Land