Check the bias voltages on the crt and Video output devices. Suspect the g2
source voltage being low or missing. Source is normally from the LOPT via a
fusible resistor, rectifier, and filtering cap.
"Jim Land" wrote in message
. 3.44...
wrote in news:1169352273.499640.161310
@q2g2000cwa.googlegroups.com:

I have a 27 inch Hitachi tv model number 27cx3b. When I turn the tv
on the screen is grey with white lines on it.
The audio is fine and everything. I did search to see if there is a
fix for this and found that there is a resistor, that is going bad.
The number of the resistor mentioned is 3340. I couldnt find it on the
circuit board anywhere. So i was wondering if the number is different
for the Hitachi. THe tv was free, so if its junk no big deal but if I
can fix it with a 99cent resistor i will. Thanks for the help.

Are the lines horizontal or vertical? How thick are they? Can you hear
the sound OK?