On Fri, 19 Jan 2007 19:37:42 +0000 (GMT), "Dave Plowman (News)"
wrote:

I'm making up some fiendishly complicated A/V outlets for a job - SCARTS,
S-Video, BNC, UHF, phonos, and a few other assorted connectors all on two
two-gang brass panels. And would like to secure the connectors where
applicable with raised head brass screws to match the plate fixing ones.
Where I can use the 3.5mm ones I have, as I've plenty of those, but some
of the connectors require smaller ones - 3mm and 2mm both 10mm or so long
would be ideal - although BA or anything else of approx the same diameter
would be ok too.

I've given up Googling - plenty say they have such things but turn out not
to - or are just the easily obtained 3.5mm electrical fixing size.

Try:

http://www.modern-screws.co.uk/model.htm

Or use stainless throughout:

http://www.a2a4.co.uk/acatalog/csk_machine_screw_raised_head_A_4.html

cheers,
Pete.