alexy wrote:
B A R R Y wrote:


In finer furniture, I prefer to cut hardwood strips, drill 1" to 1 1/2"
holes, the actual size and spacing dependent on specifics, and rip the
strips in half. the strips are then glued to the inside corners of the
shelves. The strips are strong,are barely visible, and pretty if you
can actually see them.

Trying to picture this. Do you then use a cleat with rounded ends
between these two strips, with shelves, notched for the strips,
resting on the cleats?

That's one way of hanging the shelf. I described the other in another
follow-up.