All things considered if you have the extra capacity in your panel, or if
you have access to the old line feeding the outlet for the computer, I'd
pull a new line, with a ground, to some central point, where you can put a
junction box and feed the computer outlet, including the ground. This can
then be the point to pull grounds for any other outlets that were on that
same circuit.

wrote in message
ups.com...

Tom The Great wrote:
On 30 Dec 2006 09:09:56 -0800, wrote:
imho:

Too many words.


I agree. I get too wordy sometimes for a simple question

First check if you have an existing grounding method. See if the
receptacle boxes are metal and the wiring method is AC (BX).

The boxes are metal, but the wiring is not armored. Even if it were, I
would not rely on it as grounding.

Now if
you aren't a qualified electrician then get one to do the work.
Cheaper than replacing computers, and such.


When it comes to electrical I do feel that one needs to know what they
are doing, be safe, and be comfortable with the job. I do not feel
every task requires putting hundreds of dollars in someone else's
pocket, however. If I needed to replace my panel, I'd hire an expert.
If I'm just installing a new outlet or running a ground wire, I feel
quite capable.