Doug Miller wrote:
In article , Jim Redelfs wrote:
In article ,
Puddin' Man wrote:

I switch off the main breaker and use a gas powered 40A generator
to backfeed the 30A (220v) circuit for the elec. dryer.

What can I expect? Live circuits, dead circuits? Overload
conditions??
Dead linemen?

Yeah, yeah... You switched off the main breaker, but, in your urgency and in
the dark, flipped the WRONG breaker.

Oh, puhleeeze... don't be ridiculous.

If he has enough light (from a flashlight, candle, oil lamp, moonlight,
sunlight, cig lighter, Coleman lantern, jar full of fireflies, or whatever) to
connect the generator, how do you imagine that he can't see which breaker is
the main?

For that matter, even in the dark, how does he not *feel* which breaker is the
main?

And of course it should be obvious that, once the generator is on, there
*will* be lights available to check to make *sure* that the main is off.
Properly install and use a transfer switch or just run some extension cords to
essential appliances during the outage.

Or be aware of the difference between real and imagined hazards, take steps to
prevent the real ones (such as making sure the main breaker is off), and
ignore the imagined ones. Yes, a transfer switch is the right way to do it.
No, you can't just run an extension cord to a furnace or a well pump. In an
emergency, you do what you have to do.


Both the furnace and well pump can be wired to safely except power from
extension cords, in complete compliance with the National Electric Code,
for less than fifty dollars. But you would rather put a similar amount
of money into making a suicide cord. Smart. Real Smart.
--
Tom Horne

Well we aren't no thin blue heroes and yet we aren't no blackguards to.
We're just working men and woman most remarkable like you.