View Single Post
  #25   Report Post  
Posted to alt.home.repair
CJT CJT is offline
external usenet poster
 
Posts: 1,155
Default Is There An Electrician in the House?

Puddin' Man wrote:
On Thu, 21 Dec 2006 09:48:39 -0500, "The Streets" wrote:


"terry" wrote in message
roups.com...

HeyBub wrote:

There are two phases dropped to the house, 120 each. If you lose one, you
still have the other. ....................... snip ...................

Also: While agreeing that the term 'phase' is sometimes used
........................

More correctly there are two 'legs' which are the opposite ends of the
same centre tapped 230 volt single phase!

Thus one can be considered (sort of, although incorrectly as far as AC
is concerned) as being plus 120 volts and the other as neg. 120 volts
and therefore about 240 volts between the two of them; which is used to
power heavy y items such as water heaters, electric cooking stoves
etc.

If the the two wires were really different phases they would have
voltages 120 degrees apart and there would be a peculiar voltage
between the two. Not the 230/240 volts (180 degrees with the two ends
always of opposite polarity) expected.

Same thing happened to my neighbours garage; they lost one side (or
leg) of the 230 volt supply. The 'electrician' they hired came over to
my house to borrow a multimeter and I went over and checked it for
them! Utility company fixed a defective over head drop later that day.


Losing one leg is not all that uncommon, at least around here. I've seen
this at least three time in the past year -- all problems that the local
utility
had to fix. As another poster has mentioned - the tip off is if every other
circuit is off. Also, be careful of back feeds through 220v appliances like
ranges, water heaters and dryers.



I'll bite.

Suppose I've got a (residential) 200A main breaker panel, and the
street power fails.

I switch off the main breaker and use a gas powered 40A generator
to backfeed the 30A (220v) circuit for the elec. dryer.

What can I expect? Live circuits, dead circuits? Overload
conditions??

That depends where you connect, and which breakers are "on."

There's a good chance you'll energize the whole house unless
you're careful, which might very well overload your generator.

What you suggest is _very_ dangerous. You should have a
proper transfer box.

Elec. power around here (MO) seems to get less and less reliable
by the month, else I wouldn't ask.

Thx,
Puddin'

Pease pudding hot,
Pease pudding cold,
Pease pudding in the pot
Nine days old ...



--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .