Thread
:
Getting rusty nipple off.
View Single Post
#
19
Posted to alt.home.repair
Jim Yanik
external usenet poster
Posts: 3,103
Getting rusty nipple off.
wrote in
ps.com:
Edwin Pawlowski wrote:
wrote in message
oups.com...
I'm replacing the faucet on our shower/tub. The nipple is NOT
budging. I used WD-40 and kind of stripped the threads in trying to
get the nipple off. ANy suggestions? I don't want to use too
much strength since the shower head is wiggling as I try to turn
the nipple.
Heat. If you can safely put a torch to the joint, that will usually
break it free.
A friend thinks it may be sodered on the back of the niple to the
pipe.
I'm going to try another tool to remove it. Hopefully, that will
work. Thanks for advice!
if it's iron pipe(that's usually threaded),it's NOT soldered.
Just rusted in.
Why did you need to remove the nipple anyways?
(you have to now that the threads are buggered.)
When I replaced my tub spout,the universal kit I bought at Lowes had
adapters to fit threaded pipe(2 sizes),or go over copper stub(what I had).
It was only $12 as I recall.
--
Jim Yanik
jyanik
at
kua.net
Reply With Quote
Jim Yanik
View Public Profile
Find all posts by Jim Yanik