DIYbanter - View Single Post - HELP! - water does not come back On after turning the water main back On

[email protected]

Speedy Jim wrote:
wrote:

I needed to replace an outside faucet that went to the garden hose.

So turned off the water supply using valve out by the sidewalk that
goes to my house.

Water stopped OK. Replaced faucet OK.

Now when I turn the water main back to the ON position the entire house
still has NO WATER.

I have left the main ON for about an hour now with faucets all closed
off in case the pipes needed to fill up or something, but still no
water - none- not even a dribble.

I have repeatedly turned the main on and off - still no water. Could
the valve be stuck in some way - it feels OK when I turn it back and
forth. Could something have been dislodged like mineral buildup that
blocks the line?

This is a two story house.

Anyone have any ideas whats going wrong here?

There are many types of valve, but you are probably screwed
and have to call the utility.

A "gate" valve can have the gate fall off inside.
A compression stop can have the washer fall off/disintegrate.

Fixing it means disassembly/replacement and that
means shutting off the water *somewhere* upstream...

Jim

Try turning one tap in the house on a little. If you hear air escaping
then just wait for the water. If you dont get any air noise or water
you will have to contact your water company.