leg tapering
"Patt" wrote in message
news:7qS%g.196932$R63.108402@pd7urf1no...
Can someone offer some advice on using a jig to cut tapers on legs on a
table saw. I made a jig I saw in a book but the damn wood being cut for
the
leg just moves all over the place and binds in the blade.
Patt
How are you holding the wood? It should rest against the jig, there should
be a "foot" at the bottom that acts as a stop, and you should be holding the
wood to be cut at the same time you use the jig against the fence.
|