Staffbull wrote:
Andrew Gabriel wrote:

In article . com,
"Staffbull" writes:

I have had to run the heating pipes about 50mm from the cables which
run throught the joists,.at 90 to each other so they dont run for any
distance together, would it be an overkill to make a heatshield or are
they OK, cables are above the pipes.

Fit pipe insulation on the pipes at that point.

--
Andrew Gabriel


I would but the pipe is clipped to the joist flush, I suppose I could
staple a 1/2 section,

A bit of foam tape (used for joining insulation) would do the trick if
the pipe's clean - you're only trying to reduce the heating of the cable.

--
Spamtrap in use
To email replace 127.0.0.1 with btinternet dot com