Hi

My garage door was jambing and I wrongly thought the problem was assaciated
with the spring in the box above the door. Having undone the nuts to remove
the lid of the long metal bos the springs jumped out. The tension needed to
re-fit them means I shall have to drop the box to the floor to work on it.
My problem is that I cannot see how to re-connect the lifting wires, as the
only time the is a small amout of slcak in the wires is when the door is
open. At this point about 18 inches of door is still inside the garage which
means I cannot reach to re-connect the tensioning wire, HELP Please

alan