Could be either the FBT or the HV block. Seen both. Test the transformer
and if it checks ok on both ringing and drive tests change the HV block.
Could still be a flyback, as I have had them test ok but not run, but
rarely.

There is no discrepancy. The blink codes just get you in the ballpark and
provide a starting point for troubleshooting. They are not a symptom-fix
database.

Leonard

"mknight52" wrote in message
...

Unit is 3 years old, suddenly wont stay on longer than 3 sec or
so....standby switch blinks 8 times, Sony's online site codes say check
IC406....I ordered online service manual, but it makes no reference to
an IC406 I searched the entire pdf doc...mmmm, so I did a little
digging in the SM, it says 8 blinks means a transformer on the D board
is bad..... ...I'm thinking of ordering the d board for 139.00 and just
plugging in. But I am confused by Sony's code blink
descrepancy....anyone have any ideas?

Thanks,
Mike
Texas




--
mknight52

--------------------------------------------------------------------------------
I am using the free version of SPAMfighter for private users.
It has removed 7512 spam emails to date.
Paying users do not have this message in their emails.
Try SPAMfighter for free now!