On Thu, 10 Aug 2006 12:36:51 +0100, Cordless Crazy wrote:


Bob Martin Wrote:
in 557843 20060810 080820 Guy King wrote:-
The message
from John Rumm contains these words:
-
There is sometimes a reel of foam tape also that is designed to go
round
the perimiter of the underside of the hob and help seal the joint
between hob and worktop.--

Yes, there is a length of foam tape.

Thanks for all the replies, but I still don't know what to do with
these little clamps
or brackets or whatever. Has anybody here actually installed a Candy
hob?


They should screw in to the underside of the hob and cantilever out to
clamp against the work surface. The more you tighten them the greater
the clamp down!

.... and it is possible to over do them.
Also the screw heads are often philips rather than pozi.


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html
Gas Fitting Standards Docs he http://www.makewrite.demon.co.uk/GasFittingStandards