"J T" wrote in message
...
Thu, Jul 13, 2006, 1:54pm (EDT+4) (Leon)
doth sayeth:
I use a Bench Dog router table and it uses about 10 or 12 blunt tipped
screws to level the insert. snip

Interesting. I used 1/2" plywood to make the new top on my old
table. With the bases being 1/2" plywood also, they are perfectly flat
and level in the table, no vibration, right from the start.


Wellllllll... you really don't feel the vibration so to speak. I just
noticed that things got considerably quieter when I fasten the top down.
Getting the 12 adjustment screws adjusted to the same height is tricky.
They all screw from the bottom up.