Thread
:
AC+DC adder to drive Piezo
View Single Post
#
9
Posted to alt.electronics,sci.electronics.misc
[email protected]
Posts: n/a
AC+DC adder to drive Piezo
wrote:
Yes, correct.
John Fields wrote:
On 26 Jun 2006 12:23:27 -0700,
wrote:
Hi,
I bought an AC piezo driver (0-20V, bandwidth100kHz).
I also have a DC piezo driver (0-150V).
I want to build something that can add those two signals.
---
Please bottom post.
you say you bought an AC piezo driver, but you claim that it goes
from zero to 20 volts, which makes it a DC piezo driver which can
swing between zero and 20 volts.
Then you say that you have a DC piezo driver which can swing from
zero to 150 volts, and that you want to add the outputs of both
drivers.
From that I gather that you'd like to be able to, say, crank the
150V driver up to 150V and let the 20V driver ride on that, so the
piezo would be seeing a signal varying from 150V to 170V at a 100kHz
rate.
Is that what you want?
--
John Fields
Professional Circuit Designer
A simple capacitor/diode clamp circuit would seem to do
Reply With Quote