"Leuf" wrote in message
...
On Thu, 22 Jun 2006 20:34:25 -0400, "Tim Taylor"
wrote:


Any way you would do me a huge favor? Would you look in your owners
manual,
or count the bolts it takes to mount it to the table. I don't remember my
model number, but I have the stamped wings. I'd like to see if the cast
would work. If they do, I'm going to get a set. I would really appreciate
it. I get funny looks when I try to take pictures at Home Depot.

4 on each side. The outer holes are about 1" in from the outside, the
middle holes are about 9 1/4" in. Cast iron is supposed to be easy to
drill if you need to make new holes. Keep in mind the Ridgid cast
iron extensions have 3 large holes to let you get clamps in to make
assembly easier. You might want to look around (ebay, etc) to see if
anyone is getting rid of any as people tend to replace the right
extension with a table.


-Leuf

Thanks ever so much Leuf. I went out and checked before I went to bed this
morning, my stamped wings bolt on with 4 also. Looks like cast ones will
work. I did look at the exploded parts view of your saw online, but it
wasn't real clear how many bolts it took. Now, one other thing, is the 2
sides different sizes? My stamped ones are exactly the same. Once again, the
parts view looks to my like the cast ones are too. I'll check around and see
if I can't find a couple people getting rid of some. And thank you once
again.