"ARWadsworth" wrote in
:
Or have a look a nice web page such as
http://www.userview.net/loop1.html
Adam
And/or follow this advice (assuming you have a loop in ceiling rose).
1. Switch off the power.
2. Use some form of continuity tester to discover which cable goes to
the
switch.
3. Connect all the other blacks together via the N terminal.
4. Connect all the other reds together via the L terminal.
5. Connect all the green & Yellows together via the E (or funny earth
symbol terminal
6. Take the black from the switch wire and either put some red sleeve
or a bit of red insulating tape on it and connect it to the remaining
terminal.
7. Connect the fitting brown wire to the L terminal
8. Connect the fitting blue wire to the N terminal
9. Connect the fitting green & yellow (if present) to the E terminal.