American Standard 5 ton unit and Hardstart Device on generator
FWIW, Scrolls don't equalize pressures. Most manufacturers install hard
start kits on heat pumps and a/c condensers that have a very high
probability of being used on a coil that has an expansion valve on it.
Steve,
From Copeland's website technote on "Compliant Scrolls"...
Single Phase Starting Characteristics:
No start assist devices are ever required, even if a system uses
non-bleed expansion valves. Due to the inherent design of the Compliant
Scroll, the internal compression components always start unloaded even
if the system pressures are not balanced.
I don't doubt that the systems you installed had hard starts...
I just want to know why?
Why wouldn't they just employ bleed TXV's and the standard anti-restart
relay?
Just curious...
Jake
|