I've had similar problems with Skylarks. I think they just make some bad
batches. I'd recommend their Diva model. It has a more substantial switch


"Jeff Givens" wrote in message
...
I've been having problems with these dimmers. They have the rocker preset
underneath the slider.

Two of them in a double-gang, center heatsink tabs broken off, 1000W
rating, 800 as installed. Each dimmer has 600-650W of incandescent
lighting
on it.

After about 5 or 6 months, the more commonly used one started arcing when
the rocker was switched. I got Lutron to send replacements. In about 6
months after these were installed these started arcing as well. I just
ignored it (wasn't all that bad - only when the rocker was made) but it
has
gotten progressively worse. Just now it arced horribly, even the slider
rheostat appears to be suffering, or the rocker contacts are barely being
made.

Are these just bad dimmers and if so what's a good solid one I can get? If
it matters, the sliders were usually in full on position and the rocker
toggled on/off. I don't know if this puts undue stress on the contacts.

Thanks.
__________________________________________________ _______________
JG... Jeff Givens


"My hovercraft is full of eels."